Products
AIR HANDLERS
Daikin
Daikin's AHU Line: fully custom and semi-custom options available, patented construction that provides unequaled thermal efficiencies and low leak rates.
Alliance Air Products
Custom Air Handling Units (up to 250 tons of capacity) with options that include full knockdown construction, fan arrays, energy recovery and factory-mounted controls.
Polar Cooling Technologies
Polar Cooling Technologies' Air Handling Units are available in vertical or horizontal and up to 100 tons. Standard, semi-customization, and full customization is offered.
Q-PAC Fan Arrays
Q-PAC fan arrays are a simple, efficient Fan Replacement System for AHU's that are lightweight and quiet.
Chillers
CHILLERS: AIR COOLED
Daikin
Daikin Air-Cooled Chillers: Chillers operate in off-design conditions 95% of the time, so products like the Daikin Trailblazer® and Pathfinder® provide 10% more efficiency than leading competitors at design and off-design conditions.
Jetson
Jetson by Modine Air-Cooled Chillers come in packaged, modular, or split-system solutions. Packaged units are EC motor driven and condenser fans produce an ultra-low noise level and offer increased part-load unit efficiency. Modular chillers are ideal for easy replacement, retrofit, or new construction applications and feature an industry-leading small footprint
Geoclima
Geoclima's Air-Cooled Chillers with screw compressors is available with low-speed fan and compressor sound insulation kits or LN (low noise) and LLN (super low noise) for installation in areas where noise where noise emissions must be extremely limited. Free Cooling option is also available.
Tecogen
Tecogen's Air-Cooled Chillers can be customized to suit your particular application with special options, including engine emissions controls, engine heat recovery, low-ambient control, hot gas bypass, coil guards and ultra-quiet fans.
CHILLERS: CENTRIFUGAL
Daikin
Daikin's Centrifugal Chillers, from 86 to 2700 tons, offer excellent full and part-load performance for increased energy savings. Dual compressor options offer system redundancy similar to two separate chillers, with a lower total installed cost.
Geoclima
Geoclima's Centrifugal Chillers are available in both air-cooled and water-cooled. Every unit is submitted to a performance test, with intervention tests of all the safety systems and components installed.
CHILLERS: HEAT PUMP
Daikin
Daikin's Trailblazer HP Chiller is an air-to-water heat pump chiller that provides a reversing function that allows the chiller to switch between cooling and heating modes based on the temperature requirements of the space or process being conditioned.
Jetson
Jetson by Modine's packaged air-cooled chillers and heat pumps offer reverse cycle heat pumps that eliminate the need of boiler systems by allowing the chiller to provide hot water for heating demand. Heat pumps are available in 10 through 80 ton standalone units and can be combined in modular assemblies for up to 240 tons per array.
Hecoclima
Hecoclima's heat pumps are available in air-cooled and water-cooled as well as for internal and external installations. All Hecoclima units are subjected to performance testing according to the most stringent standards in force, with intervention tests of all safety systems and components installed.
CHILLERS: MAGNETIC-BEARING
Daikin
Daikin's Magnitude® Magnetic-Bearing Chiller is up to 40% more efficient than standard centrifugal chillers and can save up to $4 million over the life of the chiller. Available from 75 to 1500 tons, the Magnitude® offers the most comprehensive size range of oil-free magnetic-bearing chillers.
Geoclima
Geoclima's magnetic-bearing chillers are characterized by incomparable performance and high efficiency levels, with an increase in EER (up to +15%), improving the already very high efficiency of Geoclima products.
CHILLERS: WATER-COOLED
Daikin
Daikin Water-Cooled Chillers: 30-300 tons; Options such as the Navigator integrates variable volume ratio (VVR®) compressor technology to give you the advantage of a system that is quiet and adapts to real-time building demands for the most efficient and cost-saving operation possible.
Jetson
Jetson by Modine's Water-Cooled Chillers: Available in scroll, modular, and split-system options. Scroll chillers are designed for performance and serviceability; heat exchangers and refrigerant systems are easily serviced. Modular chillers are ideal for easy replacement, retrofit, or new construction applications and offer superior expandability for future expansion.
Geoclima
Geoclima's Water-Cooled Chillers are available with screw compressors and dry expansion evaporators.
Tecogen
TECOCHILL Water-Cooled Chillers range from 150 to 400 tons of cooling capacity. Each natural gas engine drives a variable-speed single-screw rotary compressor, connected to a standard vapor compression refrigeration system utilizing an environmentally friendly refrigerant.
COGENERATION
Tecogen
Tecogen's InVerde e+ is an improved Cogeneration Unit that leaves an even smaller ecological footprint. Each newly designed unit is tested by an industry-standard 15-minute emissions test measuring the levels of both NOx and CO versus time. The measurements are well below the CARB compliance limits, averaging less than 1ppm.
Cultivation
Daikin
Daikin's Modular Chiller Plant (MCP) is engineered for specific indoor agriculture needs. Whether placed outdoors or on a facility's roof, Daikin's MCP simplifies the HVAC solution for grow rooms. Realize revenue from your investment sooner while providing the best environment for your product.
Alliance Air Products
Alliance Air Products' custom equipment includes Latent Energy Recovery (best for cultivators). Its proven technology delivers latent dehumidification at night and sensible dehumidification during the day. Redundant fans and drives provide added protection against crop loss from ventilation equipment failures.
Fulton
The indoor agriculture market is ever-expanding and requires a wide range of heating solutions for varying processes. With more than 70 years of engineering innovation, Fulton manufactures commercial hydronic boilers from 750K-12.0MM BTU/HR.
Tecogen
Tecogen's TecoCHILL natural gas engine-driven chillers will significantly reduce commercial growers' energy costs using clean, plentiful natural gas while waste heat can be used for dehumidification purposes.
GPS Air
Filtration options and GPS Air's NPBI Soft Ionization helps guard against contamination of your valuable crop.
DOAS UNITS
Alliance Air Products
Alliance Air Products designs and manufactures custom Dedicated Outdoor Air Systems (DOAS) with reclaim and multiple cooling/heating sources. Heat recovery options are air to air heat exchanger, heat pipe coils, run-around loop coils, and heat wheels. VFD scroll compressors optional; extremely efficient and quiet.
Oxygen8
This 100% electric HVAC system with energy recovery reduces greenhouse gas emissions and thus the carbon footprint of traditional HVAC systems. Oxygen8's low-profile DOAS design can be ceiling or wall-mounted and arrives on-site fully assembled for easy installation and minimal maintenance; integrates with VRV/VRF.
Daikin
Whether operating as a stand-alone rooftop system or integrated with a Daikin Applied terminal unit system to provide conditioned outdoor air ventilation, Daikin's 100% Dedicated Outdoor Air Rooftop Systems are optimized to meet this challenge efficiently and effectively.
FAN COILS
Daikin
Daikin's Fan Coil Units can either be exposed with a painted metal cabinet occupying the conditioned space or recessed with a wall plate or ductwork connecting it to the conditioned space. The units come in three basic configurations: horizontal in or along the ceiling, vertical running the height of the wall, and unit heaters low along the wall.
HEAT PUMPS
Daikin: Rooftops
Daikin Rebel Heat Pump's innovative design utilizes an industry first variable speed Daikin heat pump with hybrid heat (gas, electric, or hot water) options.
Daikin: VRV
Daikin VRV equipment is available with heat pump options from 8-24 HP (single module), 26-28 HP (double module), and 50-60 HP (triple module). The new Daikin VRV H-Series utilizes new technologies that increase seasonal efficiency all while offering a compact design.
Daikin: Chillers
The Trailblazer HP is an air-to-water heat pump chiller that provides a reversing function that allows the chiller to switch between cooling and heating modes based on the temperature requirements of the space or process being conditioned.
Jetson: Chillers
Jetson by Modine's packaged air-cooled chillers and heat pumps offer reverse cycle heat pumps that eliminate the need of boiler systems by allowing the chiller to provide hot water for heating demand. Heat pumps are available in 10 through 80 ton standalone units and can be combined in modular assemblies for up to 240 tons per array.
Hecoclima: Chillers
Hecoclima's heat pumps are available in air-cooled and water-cooled as well as for internal and external installations. All Hecoclima units are subjected to performance testing according to the most stringent standards in force, with intervention tests of all safety systems and components installed.
INDUCTION/CHILLED BEAMS
QLCI, Designed by TROX®-Carson Solutions
QLCI, designed by TROX®, combines the unique operational characteristics of thermal displacement ventilation with efficient active chilled beam technology in a unitary modular design. Through displacement ventilation, QLCI provides efficient and direct distribution of fresh outside air to the occupied space – improving Indoor Air Quality (IAQ) and in a broader sense, Indoor Environmental Quality (IEQ).
NuClimate
Nuclimate is a leading manufacturer in induction beam technology with sound levels below NC30. Low entering water temperatures (as low as 42°F) allow for sensible AND latent cooling. Nuclimate products offer low installation and operating costs and are available with air filtration.
INDOOR AIR QUALITY PRODUCTS
smartIAQ
smartIAQ is a fresh lineup of intelligent clean air systems appropriate for energy saving and general air quality management. smartIAQ Energy Solutions easily achieve compliance to ASHRAE 62.1’s Indoor Air Quality Procedure (IAQP). smartIAQ Performance Systems answers the challenge for better air quality in commercial spaces through quiet, highly efficient, first-pass cleaning capacity.
GPS Air
GPS’ NPBI️ technology cleans indoor air. This patented technology produces a high concentration of positive and negative ions, delivering them to the space via the ventilation system. Within the air stream, ions attach to particles, where they combine, become larger and are more easily filtered from the air. When ions come in contact with pathogens, they disrupt the pathogens’ surface proteins, rendering them inactive.
Oxygen8
Through the process of exchanging stale indoor air with outdoor fresh air, VOCs, CO2 and viruses are exhausted from the space. Oxygen8's polymer membrane cross-flow core design means there is no possibility of virus cross-over in the space.
Antrum
Antrum continuously monitors and reports indoor air quality on up to 32 rooms from a single location, eliminating the need for expensive maintenance and calibration procedures. IAQ data is securely stored on the cloud and reports are easily accessible on your computer or phone.
CORE
The innovative CORE Polymer Membrane is impermeable to all kinds of microbes. This innovative membrane allows energy transfer to occur whilst preventing the crossover of contaminants such as viruses, gases and VOCs.
MODULAR CHILLER PLANTS
Daikin
Daikin Modular Central Plants are designed specifically to support your needs today and for the future, utilizing highly efficient components; expertly produced, installed and started; and supported over its life. You can rest assured that your central plant will provide you many years of reliable operation.
Alliance Air Products
Alliance Air Products' Modular Chiller Plants: Stainless steel construction, classified, factory piping, factory electrical, seismic rating, AAP Controls integration (customer-specific platform).
PTACS
Islandaire
Islandaire, the largest PTAC manufacturer in the U.S., designs models to cross-reference all major and obsolete brands. Each Islandaire model fits perfectly into the existing original wall sleeve assembly, thereby saving both time and money during installations. The units are made in America and go through a 4-phase testing process before shipment.
ROOFTOP UNITS
Daikin
Available from 3-150 tons, Daikin's Rooftop Units can serve a single zone or a multi-zone building. Some units can be specifically designed for make-up air, where only outside air is treated and sent to the space. Inverter compressors, belt-less ECM fans, and energy recovery solutions make rooftop systems an easy-to-maintain, energy-efficient choice for conditioning any space. Daikin's Rebel and Rebel Applied are also available with Heat Pump technology!
Polar Cooling Technologies
Polar Cooling Technologies' Rooftop Units (available from 5-100 tons) are available in air or water-cooled. Standard, semi-customization, and full customization is offered.
Alliance Air Products
Alliance Air Products designs and manufactures custom DX systems to meet your individual design needs.
SPLIT SYSTEMS
Daikin
Daikin’s Split and Multi-Split type air conditioning systems offer superior performance, energy efficiency, and comfort in stylish solutions conforming to all interior spaces.
UNIT VENTILATORS
Daikin
Daikin's Unit Ventilators use advanced HVAC technology to reduce operating costs while closely matching classroom comfort requirements. Since 1918, Daikin and its legacy brands have remained an industry leader by meeting the changing requirements of schools with the highest quality unit ventilator products available.
Airedale
Airedale by Modine manufactures packaged vertical, under-the-window, and geothermal water source Unit Ventilators. Designed for efficiency, noise reduction, and easy installation, Airedale offers multiple configurations, capacity options and product footprints to handle a wide variety of specifications and CFM demands.
VRV
Daikin
Daikin VRV Systems provide advanced solutions for almost any large residential to commercial application. Available in air-cooled or water-cooled solutions and heat recovery or heat pump systems, VRV provides advanced heating and cooling options with individual zone control for both open plan and tightly grouped applications.
WATER SOURCE HEAT PUMPS
Daikin
Daikin's high-efficiency, self-contained WSHP units are available in various sizes and configurations and can be placed virtually anywhere within a building. Each WSHP system responds only to the heating or cooling load of the individual zone it serves permitting excellent comfort levels for occupants, better control of energy use for owners, and lower seasonal operating costs.
Islandaire
Islandaire designs and manufactures high-quality Water Source Heat Pumps and these models can be used for direct replacement of McQuay, Singer, and Climate Master units or in new construction projects.